7
Adjusting the Angle of the Light
To adjust the angle of the light,
rotate the head to the desired
position. The unit includes an
internal friction brake that will
hold the light in place. The screws
on the side of the light should not
be loosened.
Switching the Light
Output Modes
To adjust the Light Modes:
Rotate the mode switch towards
the front of the light, and toggle
through the modes.
Light Modes
High
Medium
Low
Spot
Light output (lumens)
14,000
8,000
2,000
6,000
Average run time (hours)
1.2
3
7
3.5
WARNING!
The surface of the light becomes hot when turned on and could result in
burns or serious injury when touched with bare skin. Always let the light cool
down or wear personal protective equipment when handling a hot light.
CAUTION!
When adjusting the light head fingers may be pinched between the light
head and the base that may result in minor or moderate injury. Always keep
fingers clear from getting caught between the light head and the base.
Turning on the Light
Turn the light on using the switch
on the top of the light. Do not
place objects directly in front of
lens. Damage to the lens can
occur from over heating.
