Akrapovic P-HF841, Instruction Manual

Page: 156 / 167

Blinking White
no communication with
the receiver; refer to the
troubleshooting section
Blinking Red
communication with the receiver
is working but there is an issue
with the middle valve system; see
the troubleshooting section
Red
Sound position 2
- Middle valve closed (above 1000rpm)
White
Sound position 1
- Middle valve open
The LED colors change when the valve position (the modes of the
Akrapovič Sound Kit) is changed:
No color
: sleep mode
Orange
: battery level too low to operate
or detected default on the battery
If the button is not pressed for a full fifteen seconds, the Sound
Remote Controller enters sleep mode until the next time it is pressed.
Note that the middle valve is always in default position 1 when
the engine is started. If the Sound Remote Controller stops
operating during driving (e.g., the battery runs out, or the Sound
Remote Controller is damaged or is not functioning due to some
other technical reason), switching between the modes will be
automatically managed by switching between different car modes.
At the next engine start, the default mode is applied.
The Sound Remote Controller will not function when the Akrapovič
Car Sound Kit App is connected.
15 / 36
14 / 36