Akrapovic P-HF841, Instruction Manual

Page: 161 / 167

24 / 36
the screen (Figure 11) to switch between the two different positions
of the middle valve.
Note that the valves are always
in default position 1 when the
engine is started. If the Bluetooth
connection is lost/disconnected or
the Akrapovič Car Sound Kit App is
closed, the valves remain in the last
mode activated until the vehicle’s
engine is switched off. At the next
engine start, the default mode is
applied.
By touching the back button, the
app disconnects from the sound re
-
ceiver. The Sound Remote Control -
ler can now be used.
Figure 11
TROUBLESHOOTING
If you’re having trouble using the Sound Remote Controller and/
or Akrapovič Car Sound Kit App, first check the following to see if
the Sound Remote Controller and/or Akrapovič Car Sound Kit App
is paired with the sound receiver. If yes, refer to the list of possible
solutions in the table below.
If you’re unable to resolve the problem based on the suggestions
below, contact your local authorized Akrapovič partner.
Sound Remote Controller
PROBLEM
No LED on the Sound
Remote Controller
POSSIBLE CAUSE
Battery level too low
to function
Sound Remote
Controller not
working properly
SOLUTION
Replace the battery.
Remove the battery, press
the Sound Remote Control-
ler button for one second,
and put the battery back in.
25 / 36