![AKM AKD4637-B Manual Download Page 35](http://html1.mh-extra.com/html/akm/akd4637-b/akd4637-b_manual_2886276035.webp)
[AKD4637-B]
<KM120603>
2018/10
- 35 -
(6-5) About
“Notch Auto Correct”
If the gain of 5-Band EQ is set to “-1”, Equalizer becomes a notch filter.
When the center frequency of two or more notch filters is adjacent, the gap is generated in the center frequency.
(
) When “Notch Auto Correct” button is checked, the center frequency of the notch filter is automatically
corrected. The gain setting of the automatic correction function is effective and only EQ of “-1” is effective.
(
This automatic compensation is effective to EQ which set the gain as “-1”. (
Note 13. There is a possibility that the automatic compensation is not correctly done when the width of the center
frequency is smaller than that of the bandwidth setting.
Note 14. Gain is fixed to “-1.0” by [Notch OFF/ON] button “ON”.
Setting of center frequency: 4400Hz, 5000Hz, 5400Hz / Bandwidth: 200Hz (EQ2~4))
Figure 31. 5Band Equalizer Operation (Not Check of “Notch Auto Correct”)
Setting of center frequency: 4400Hz, 5000Hz, 5400Hz / Bandwidth: 200Hz (EQ2~4))
Figure 32. 5Band Equalizer Operation (Checked of “Notch Auto Correct”)
Gain is fixed to “-1.0”
by [Notch OFF/ON]
button"ON."