[AKD4637-B]
<KM120603>
2018/10
- 34 -
(6-4) 5-BandEQ operation on Filter Plot screen
When EQ (1~5) is turning “ON”, a green number is displayed on the Filter Plot dialog box.
This number shows the setting of the center frequency and the gain of each EQ.
(The horizontal coordinates of a number is the center frequency of EQ, and the vertical ordinate is a gain of EQ
(-1
～
2.99).)
The number under the display is operated with the mouse, and it is possible to set the filter characteristic on this
screen.
The center frequency and the gain setting are changed by moving the mouse while left-clicking. (
The setting of the bandwidth is changed by moving the mouse while right-clicking.
Figure 29. Filter Setting (Left-clicking operation)
Figure 30. Filter Setting (Right-clicking operation)
The number is selected.
The movement operation is done
while left-clicking.
After operating the mouse,
the value of the center frequency and the gain is
updated.
Band width can be updated by
right-clicking and move of mouse.
