cds-fx
cds-fx
cds-fx
3
6
PANEL DE CONTROL
DESCRIPCION DE MANDOS Y FUNCIONES
10
12
20
14
15
17
16
18
1
2
3
4
5
7
11
9
19
6
8
13
21
22
23
1. OPEN (abrir y cerrar)
Utilice este botón para reproducir la pista de un modo rápido, hacia
Presionar este botón para abrir o cerrar la bandeja del disco.
adelante o hacia atrás. También se puede usar para variar la velocidad
2. COMPARTIMIENTO DE DISCOS
de reproducción del sonido.
Coloque el disco en la bandeja con la etiqueta hacia arriba.
7. CONTINUE/SINGLE (AUTO CUE)
3. L.C.D. (Liquid Crystal Display)
Nos permite cambiar entre el modo de reproducción SINGLE y
El display de cristal líquido nos informa del número de pista, el
CONTINUE. Cuando SINGLE/AUTOCUE es seleccionado, se
tiempo (min, seg., “Frames”), el valor del Pitch y además del tipo de
indicará como PLAY 1 en el LCD. El equipo reproducirá una canción
reproducción; continua o simple autocue.
y luego se parará.
4. PLAY/PAUSE
8. CUE (punto de referencia para reproducción)
Este botón tiene la misma función de un reproductor común de Cd´s.
La función Cue nos permite reproducir el disco desde un punto
Al presionarlo se empezará a reproducir el disco y al pulsarlo
determinado tantas veces como deseemos.
nuevamente se activará el modo PAUSE, esto detendrá la melodía en
Presione Play/Pause para parar la reproducción, a continuación
el punto en que se pulsó esta función.
presione el botón Cue para determinar el punto de comienzo de
5. TRACK SKIP (salta de pista)
reproducción. Cada vez que vuelva a presionar Cue la reproducción
Estos botones sirven para seleccionar la canción que queramos oír.
se retomará desde este punto. Observará que el LED de Cue dejará de
Forward skip (siguiente canción) & Back skip (canción anterior).
centellear cuando presione el botón Cue.
6. SEARCH (búsqueda)
key
lock
pitch
CDS-FX
REV
-
FWD
t
a
r
c
c
h
s
professional
cd player
cue
1
cue
2
cue
3
on/off
brake
select
a
b
reloop/exit
memo
relay
flanger
filter
reverse
scratch
effects
8%
play/pause
cue
track skip
search
auto cue
continue
single/
time/
stop
-
CDS-FX
open
seamless loop
pitch bend
loop
professional cd player
track
min
sec
frame
+10
10
9
8
7
6
5
4
2
1
0
TAP
16%
32%
-
+
3
9. JOG DIAL (FWD & REV)
(
4
)
Return RELOOP: Return to the loop playback by pressing
This contains two functions:
RELOOP/EXIT.
* Speed Control
(
5
)
Change “START POINT” & “END POINT” by pressing A
Rotating this dial in Play mode will change playback speed
& B/LOOP in play mode.
accordingly.
(
6
)
The interval between A and B point must be more than 20
Rotate clockwise, the player speed increases; rotate counter-
frames, or the B point will be canceled, then Loop function
clockwise, the speed decreases.
disappear, and LOOP fades on the LCD.
* Searching
18. CUE
Rotating this dial in Pause mode, the player will forward or
When the unit is just POWER ON, CUE1/2/3 Memo are not yet
backward to the desired point for start. The searching speed
activated and the button LEDs are off.
changed according to the dialing speed. It can be carried out by 1
(
1
)
To activate the CUE1 key in either Play or Pause mode
frame increment.
Press Memo key first, then press the CUE1 key to complete the
10. TIME/OUTRO
memory setup. The button LED flashes 5 times quickly. CUE1/2/3
This button switches the time display between each Remaining
keys can be activated the same way.
time, Elapsed playing time, and Total remaining time; it also
switches on and off the OUTRO function. When the display shows
(
2
)
Once the memory is set, press the CUE1/2/3 to return to
OUTRO, the player only plays the last 30 seconds of each track.
the setup point. The button LED flashes slowly to indicate it is in
The unit will be in “stop” mode if you continue to press this button
playing from the setup point.
for more than 3 seconds.
(
3
)
To reset the CUE1 key in either Play or Pause mode
11. PITCH
Press the memo key first, and then press the CUE1 key at your
This button changes the play speed.
desired point and complete the reset, the button LED flashes 5
Press PITCH button (the PITCH LED is lit) to enable the PITCH
times quickly. CUE2/3 can be reset the same way.
CONTROL SLIDER to increase or decrease the playing speed.
19. KEY
When the PITCH is off, the speed automatically back to normal.
To maintain the constant tempo, it's not changed while the pitch
The pitch can be changed up to ±32% by moving the slider up and
slider is moving.
down.
20. BRAKE
NOTE: (1) The pitch slider will not function if the PITCH LED is
Press this button to change the speed of PAUSE and START. The
off.
LCD will display BRAKE after this button is pressed. This sound
(2) This pitch button will not have effects on PITCH bend.
effect can be performed independently, or in parallel with other
12. ±8%, ±16%, ±32% button
effect.
These 3 buttons can let you choose the PITCH range from ±8%,
21. SOUND EFFECT SELECT
±16% up to ±32%.
To select the one you need from 4 kinds of sound effects and
13. PITCH BEND (+/-)
perform by the turning jog, it makes the change of background
When the CD is playing, the pitch bend function allows the
music. THERE ARE 4 SOUND EFFECTS.
position of the bass beats to be matched after the pitch has been
(
1
)
SCRATCH:
adjusted. The pitch will automatically rise (+8/16/32%) while VR
Move the JOG WHEEL backward and forward like scratching a
knob is moved up. The pitch will drop (-8/16/32%) while VR knob
turntable record.
is moved up and return to the original pitch when the knob is
(
2
)
FLANGER:
moved center. By changing the pitch in this way the position of the
It sounds like the airplane takes off. To turn the jog clockwise, it
beats can be matched.
makes the effect longer.
14. PITCH CONTROL SLIDER
There are 2 selections for playback speed ranges (8%, 16%, 32%)
(
3
)
FILTER:
through 11. PITCH BUTTON & 12. 8/16/32% BUTTON.
There are bass & treble. To turn the jog clockwise, it will cue bass
By moving the pitch control slider, you can achieve the playback
off but keep treble. To turn the jog counter-clockwise, it will cut
speed you want between MINMUN (up side) & MAXMUN (down
treble off but keep bass.
side).
(
4
)
REVERSE WHEEL:
15. NUMBER KEYS
The music is playing backward, dial the JOG WHEEL to change
(
1
)
0/1/2/3/4/5/6/7/8/9/10: You can choose the number keys to
the playing speed as PITCH BEND.
pick the track exact track you want to play at any time. The track
(
5
)
Power on the No.1 LED blinks at the same time.
number will show on LCD.
(
6
)
Press the SELECT button, the blinking LED will move in
(
2
)
+10: Each press of this button allows the unit to advance
order (1-2-3-4) to the desired effect.
10 tracks.
(
7
)
Press the ON/OFF button to light the blinking LED and
16. TAP
activate the sound effect.
Press this button to get the BPM (beat per minute) value.
(
8
)
Dial the JOG WHEEL to adjust the effect parameter.
17. SEAMLESS LOOP/RELOOP
Press the ON/OFF button again to deactivate the sound effect.
There are A, B/LOOP, RELOOP/EXIT buttons.
22. SOUND EFFECT ON/OFF
(
1
)
A ― “start point” (A point)
Press this button to activate or deactivate the sound effect. While
(
2
)
B/LOOP ― “end point” (B point) Press B/LOOP to set end
the effect is activated, the LED under the relative number is light;
point (B point) and start loop playback automatically. LOOP blinks
it's blinking while the effect is deactivated.
on LCD.
23. RELAY
(
3
)
RELOOP/EXIT ― To exit the loop playback, Press
Press the “RELAY” button to activate. When one unit is in play
RELOOP/EXIT to exit the loop playback. LOOp lights on the
mode, and the other unit is in “pause” mode; pause the playing
LCD. And the playback goes on from B point.
unit, the other unit will automatically start to play (the button will
flash).
e
ng
li
sh
PART NAMES AND FUNCTIONS