12
c.
When the cut card appears as follows, select [-] key (Select from -2.0mm to +2.0mm)
Visible Edge
Sub-accumulated Counting Reset
1)
When [Set Parameter] key is pressed nine times, the LCD panel will show:
2)
Press the [-] key to reset the sub-accumulated counting.
Check the Total Accumulated Cards
1)
When [Set Parameter] key is pressed eight times, the LCD panel will show:
2)
Press [Mode changeover] key to return to the standby state.
Adjust The Name Card Size
1)
When [Set Parameter] key is pressed ten times, the LCD panel will show:
2)
Select it (85mm, 89mm, 90mm, 95mm) via [+] or [-] key.
3)
Press the [Mode changeover] key to return to the standby state.
Select The Cutting Column
1)
When the [Set Parameter[ key is pressed twelve times, the LCD will show:
Content
Sub-accumulated cards:
XXXX
Accumulated cards:
XXXXXX
Slitting width:
XX
Cutting Columns:
X
Summary of Contents for Cardmac Pro
Page 18: ...3 5 x2 ...
Page 19: ......
Page 20: ......
Page 21: ...T e mp l a t eD i me n s i o n sf o r C u s t o m L e n g t hC a r d s ...
