SPX+ Introduction Manual - updated until firmware 4997
- 24 -
Important Notes on custom desktops
Please note the custom Desktops that are created
ARE NOT
stored in the SP+ units memory. These
are HTML based, so they are stored in the browser cache, or local data on the Chrome & Firefox
browsers. In other words, the Workspaces are not portable.
So, if you factory reset the unit or clear the cache on your internet browser the folders and custom
desktops will be lost.
Generating a backup file from the Maintenance menu will also contain the custom desktops (added
after firmware version 1.0.4209).
Without generating a full backup file, you could to export and then import the desktop configuration
before you change browser, change your device or before you clear your browser cache. The
configuration files will be saved as JSON files.
You can click the Export / Import command on a Desktop to save/reload it individually:
Viewing cu
stom desktops different users & PC’s
Regarding the viewing of your custom desktops via other users. Because multiple users can log into
the SP+ unit from the same PC or different PC’s on the network, the following applies:-
If two different users (different usernames) log in to the same SP+ unit they will not be able to view
the other users custom desktops.
If the same user logs into the SP+ from two different PC’s they will not be able to view the custom
desktops (they do not synchronize), so the custom desktops will only be viewable on the original PC
that they were created on as again these are stored on the PC’s browser local data.
