Three Phase and Three Phase CT Type PMSFL User Manual - 18
In the next screen you can setup your Polling Interval times and retry times as shown
above.
Polling Interval -Here you can select how often the securityProbe polls information from
the PMS unit.
Connection Time out- This option allows you to adjust the time (in seconds) the
securityProbe will wait for a response from the PMS before timing out.
Retry - You can set the number of times the securityProbe will retry after a timeout has
occurred.
After adding all the values you require you will be returned to the PMS main settings
page which will now show the list of values or sensors, each reading and status. It may
take a few minutes for the readings to be updated depending on how many PMS you
have connected.
How to setup each of the sensor or value thresholds will be shown on the next page.
However to open the sensor threshold page simply click on the links in the Sensor Name
column in the left side of the Power Meter page.
