7.9 Tray
Please follow these steps so as to mount tray:
Dismantle safety rail
(->look point
6.9
,
page 2
0
)
STEP 2.
Put tray in a place where safety rail was
mounted. Remember that buttons placed on
tray's pipe should be inserted into frame
(fig.
65);
STEP 1.
;
STEP 3.
It is possible to adjust the tilt angle of tray's top. Loosen lever situated
under the top and then turn it anticlockwise (fig.
65
,
66
). If the tilt angle of tray's
top is adjusted, remember to screw firmly lever and turn it clockwise.
URSUS ACTIVE
27
fot.15
fig.63
fot.15
fig.64
:
www.akces-med.com
'
+48 17 864 04 77
*
fot.15
fig.66
fot.15
fig.67
USA_403
CAUTION!
Each time before using the harness check
whether:
· The buckles do not unclip under the pressing force;
· The buckles and belts do not move as a result of
incorrect fastening.
