URSUS ACTIVE
7.6 H Harness
Please follow these steps so as to mount
H
harness
:
STEP 1.
Dismantle standard 5 points belts.
STEP 2.
Upper belts from H harness should be
inserted into grooves from
wheelchair
's
backrest (fig.
49
) and then insert them into
clasps from backrest's back (fig.
50
). Clasps
should be firmly tightened on belts (fig.
51
).
40
24
fot.15
fig.49
:
www.akces-med.com
'
+48 17 864 04 77
*
Lower belts from H harness should be
pulled through backrest and inserted into
clasps (fig.
52
). Clasps should be firmly
tightened on belts.
STEP 3. H Harness
is fastened by means of clamp which makes it possible to
unfasten the patient quickly if necessary (fig.
53
).
H
arness is also equipped with
grips situated by belts. These grips are used so as to adjust vest to patient's
measurements (fig.
54
).
fot.15
fig.50
fot.15
fig.51
fot.15
fig.52
USA_411
