6.10 5 points belts
Wheelchair
is equipped with 5 points belts
which stabilize the patient and protect
him/her from felling. Connect fastenings
situated on vest's belts (fig.
36
) and insert
them into clip from seat (fig.
37
) so as to fasten
the belts . In order to undo vest it is necessary
to press red button from clip and then take
out fastenings.
URSUS ACTIVE
6.9
.
Safety rail
Wheelchair
is equipped with safety rail
thanks to which patient do not fell out. It is
possible to dismantle this rail by pressing two
buttons situated on rail's frame and pulling
rail upwards (fig.3
4
)
.
40
20
fot.15
fig.34
fot.15
fig.35
6.8
.2.It is also possible to adjust the tilt angle
of backrest. In order to adjust it, loosen knobs
that regulates backrest's tilt angle (this knob
is situated behind backrest) and turn it
anticlockwise (fig.3
3)
. Next, adjust backrest
at your discretion and tighten fastening
element clockwise.
fot.15
fig.33
:
www.akces-med.com
'
+48 17 864 04 77
*
CAUTION!
Slide out the casters
adjustment maximum while using
seat in horizontal position (bed
function)! (llok point 6.1.1, page 11)
