15
Wall Installation Instructions
14
1
Remove the screws on the rear of the PDP panel.
2
Connect Insulation holders to screws. (see the illustration below)
3
Tighten the screws connected to the Insulation holders on the rear of the PDP panel.
1
Do not install the PDP in any location other than a vertical wall.
2
To protect the performance of the PDP and prevent problems, avoid the following
places.
• Do not install next to smoke and fire detectors.
• Do not install in an area subjected to vibration.
• Do not install in an area subjected to high voltage.
• Do not install near or around any heating apparatus.
3
Use only recommended parts and components.
Screws
(4 EA)
Insulation holders
(4 EA)
Installation Notes
Parts
(
Wall attachment panel is sold separately. Check with your dealer
)
Fixing the PDP panel to the wall attachment panel bracket
Removing four screws
Connecting four screws
Wall attachment panel
Summary of Contents for PDP4294
Page 1: ...Owner s Instructions PDP4294 BN68 00504A 00 ...
Page 50: ...99 Memo 98 Memo ...
