manualshive.com logo in svg

Akai PDP4294, Owner'S Instructions Manual

The Akai PDP4294 promises an incredible visual experience with its high-resolution display and vibrant colors. Ensure you get the most out of this exceptional product by downloading the free Owner's Instruction Manual from manualshive.com. Learn all about its features and settings to optimize your viewing pleasure.

Share
Download
background image

25

Connecting a Camcorder

24

Connecting a VCR to the Video or S-Video/Audio jack

S-Video Cable

Audio Cable

Video Cable

Power Plug

Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. 

(Note: For better video, you can use an S-Video cable.)

Videotape Playback:

1. Turn on your PDP, and press the SOURCE button on the remote control.

2. Move the joystick up or down to select “Video” or “S-Video”, then press the joystick to enter.

3. Turn on your VCR, insert a videotape and press the play button.

How to Connect

The ferrite cores are used to attenuate undesired signals. When connecting the audio cable (PC,
DVI, S-Video, Video) , attach one of these ferrite cores to the cable near the connector.

When you connect the audio cable (PC, DVI, S-Video, Video) to  the
connectors, bind the ferrite core around the cable to secure it.

Ferrite Cores 

Connecting a VCR 

Audio Cable

Video Cable

Power Plug

Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.

Viewing Tapes

1. Turn on your PDP, and press the SOURCE button on the remote control.

2. Move the joystick up or down to select the “Video”, then press the joystick to enter. 

3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder 

owner's instructions.)

4. Set the IN/OUT switch on your camcorder to OUT.

5. Insert the tape into the camcorder and press the Play button.

How to Connect

Viewing camcorder tapes

PDP

VCR

PDP

Camcorder

Ferrite Cores

Ferrite Cores

Summary of Contents for PDP4294



















































Reviews:

No comments

Related manuals for PDP4294

DAHAO A88 Owner'S Manual preview
A88
Brand: DAHAO Pages: 189
Daktronics Galaxy AF-3165 Display Manual preview
Galaxy AF-3165
Brand: Daktronics Pages: 97
National Instruments NI PXIe-4464 Getting Started Manual preview
NI PXIe-4464
Brand: National Instruments Pages: 8
Samsung SyncMaster 320TSn-2 Manual D'Installation Rapide preview
SyncMaster 320TSn-2
Brand: Samsung Pages: 21
Samsung SyncMaster LD190G Manual Del Usuario preview
SyncMaster LD190G
Brand: Samsung Pages: 67
Samsung SyncMaster 460UT Guía De Inicio Rápido preview
SyncMaster 460UT
Brand: Samsung Pages: 25
Samsung SyncMaster 204Ts User Manual preview
SyncMaster 204Ts
Brand: Samsung Pages: 76
Siko MA508SG Installation Instructions Manual preview
MA508SG
Brand: Siko Pages: 36
ElectrIQ eiQ-27MF144FSHDRB User Manual preview
eiQ-27MF144FSHDRB
Brand: ElectrIQ Pages: 16
NewHawk UMEN-260314-V1.0 User Manual preview
UMEN-260314-V1.0
Brand: NewHawk Pages: 14
Rydeen BM354S Owner'S Manual preview
BM354S
Brand: Rydeen Pages: 5
Pyle Home PLVW10IW User Manual preview
Home PLVW10IW
Brand: Pyle Pages: 2
ViewSonic CD5230 Specifications preview
CD5230
Brand: ViewSonic Pages: 2
Qardio QardioArm User Manual preview
QardioArm
Brand: Qardio Pages: 32
lifeSMART LS-926 User Manual preview
LS-926
Brand: lifeSMART Pages: 18
VTech Safe&Sound DM111 User Manual preview
Safe&Sound DM111
Brand: VTech Pages: 2
ViewSonic VA2747-mhj User Manual preview
VA2747-mhj
Brand: ViewSonic Pages: 49
Planar UltraRes Series User Manual preview
UltraRes Series
Brand: Planar Pages: 104

Brands by name

Popular brands

Load more brands