- 40 -
VCR Set Up
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
Manually Tuning
Channel Preset
•
It should not be necessary to tune in a broadcast channel manually except in unusual circumstances such as
poor signal.
P R E S E T
C H A N N E L
F I N E T U N I N G
D E C O D E R
S K I P
1
O F F
O F F
C H 2
1
O N
O N
6. Press the / buttons to start tuning in either direction. Tuning will stop when a channel is received. If it is not
the desired channel, press the / buttons to continue tuning.
7. Press the
/ button to select FINE TUNING. Press and hold the / buttons until the sharpest colour picture
is obtained.
8. Press the ENTER button to confirm.
9. Press the MENU button to leave this function.
C H A N N E L P R E S E T
C H A N N E L S O R T
C L O C K
L A N G UA G E
I N S TA L L AT I O N
To manually tune in channel follow the procedure below:
1. Press the MENU button.
2. Press the
/ buttons to select SET UP. Press the ENTER button to
confirm.
3. CHANNEL PRESET will be highlighted. Press the ENTER button.
4. Press the
/ buttons to select CHANNEL.
5. Press the +10 button to select CH or CC. This will determine whether off
air and cable (CC) is tuned first. Note that both off air cable will be tuned
regardless of the setting.
Channel Sort
1. Press the MENU button.
2. Press the
/ buttons to select SET UP. Press the ENTER button to confirm.
3. Press the
/ buttons to select CHANNEL SORT. Press the ENTER button to
confirm.
C H A N N E L P R E S E T
C L O C K
C H A N N E L
S O R T
Notes:
• If when moving channels the picture becomes unclear and the On-Screen Display is unreadable, the DISPLAY
button can be used to toggle between a blue background and the normal picture.
• The blue background will be shown until either another channel is selected or the DISPLAY button is pressed again.
4. The MOVE position will be highlighted. Press the ENTER button to confirm.
5. Press the
/
/
/ buttons to highlight the channel to be moved. Press the
ENTER button to confirm.
M O V E 1 / 5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
6. Press the
/
/
/ buttons to highlight the new position for the channel.
Press the ENTER button to confirm.
7. If any more channels are to be moved, repeat procedure from step 5.
8. When all the channels are in your preferred order, either press the CLEAR
button to return to the CHANNEL SORT menu or press the MENU button to
leave the MENU function.
M OV E 1 / 5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Summary of Contents for CMB-4300SS
Page 1: ......
