Akai CMB-4300SS, Operator'S Manual

Page: 39 / 59

- 38 -
VCR Set Up
(continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page)
On-Screen Display
All the information you need on the VCR status will be summarized on the On-Screen Display. If you are recording,
playing back a tape or watching a broadcast on the video channel you can call up three standard On-Screen
Displays. The display can be selected by pressing the DISPLAY button on the remote control, 1,2,3 or 4 times.
1. AUTO - the current mode and channel number will be displayed for 3 seconds when an operation or number
button is pressed.
2. FULL - all the active features will also be shown on screen.
1 C H 6 0
N I C A M
S T E R E O
L R S P
3. COUNTER - this display will show the tape counter and amount of tape remaining.
Notes:
• The default time and date will not be displayed if the clock has not been set.
• The VCR will return to display 1. Each time it is switched on.
• If you are recording from this VCR to another, make sure you remove the display from the screen otherwise it will
be recorded.
4. DISPLAY OFF, this will remote the display from the screen.
R E M 1 : 0 5
0 : 0 0 . 0 0
1 C H 6 0
N I C A M
S T E R E O
L R
Programme number and channel
Tape Status
Auto Enhance
NICAM signal
Tape speed
Audio output mode
Time
Date
Tape remaining
Tape counter
1 9 : 0 0
0 3 / 1 8 0 3
R E M 1 : 0 5
0 : 0 0 . 0 0