Akai CMB-4300SS, Operator'S Manual, Page: 40 / 59

- 39 -
VCR Set Up
(continued to next page) (continued to next page)
(continued to next page) (continued to next page) (continued to next page)
Manually Tuning
Procedure
This VCR automatically tunes the TV channels for your area. If the VCR has not previously been tuned-in, instructions
will be given on screen to guide you through this procedure.
• If you are connected via a SCART Lead, go to step 6.
Caution:
If the CLEAR button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer to RF through ON/OFF
below.
Notes:
• If the screen does not appear, follow the procedure RESET THE VCR.
• If the have a preferred channel, the RF channel can be set manually (21-69) after step 3 using / buttons.
RF THROUGH ON/OFF
• If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR can be turned OFF
and ON by pressing the CLEAR button then the SET button on the remote control at point 3 of the RF CHANNEL
TUNING. This will help minimise interference.
4. Tune the selected channel on your TV. (Refer to your TV manual) until the menu
screen appears.
5. Press the ENTER (SET) button to store the RF channel setting and continue with
the installation.
AU TO I N S TA L L AT I O N
PRESS SET KEY TO START.
AUTOMATISCHE EINSTELLUNG
ZUM BEGINN. DIE SET-TASTE
DRÜCKEN.
SET :
TV SCREEN
EINGABE
ENDE
MENU :
6. Press the / buttons to select your language and press the ENTER button
to confirm.
7. Press the / buttons to select your country and press the ENTER button
to confirm.
8. Ensure your Aerial / Scart cable is connected to your VCR and then press
the ENTER button to confirm.
(Auto tuning may take a few minutes.)
L A N G UA G E
E N G L I S H
D E U T S C H
F R A N Ç A I S
I TA L I A N O
E S PA Ñ O L S V E N S K A
N E D E R L A N D S
D A N S K
N O R S K
S U O M I
SET : ENTER
: CHANGE
EXIT MENU :
On Completion the MOVE menu will appear showing the preset channel order. By pressing the DISPLAY button,
the VCR will change to a blue background. This may help you see which channels your VCR has tuned in. Press
the MENU button to exit.
If the clock is not automatically set, the clock screen will appear, refer to MANUALLY SETTING THE CLOCK.
If you wish to customize the channel order refer to MANUALLY SORTING CHANNELS.
Refer to the Manual Tuning chapter if
• Your VCR could not tune automatically - due to for example poor reception.
• You wish to re-arrange the channel order.
• You wish to change the time on the clock or if the VCR could not set the time.
3. Press the VCR STOP button. The VCR will search and
display an ideal RF channel.
Wait for the flashing channel number to appear on the display
window, this number will be between 21 and 69.
1. Ensure your VCR is still in the STANDBY mode.
2. Turn on the TV. Select an unused channel on your TV for your VCR (there may be a dedicated video channel refer
to your TV operation manual).
S P
VCR