After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
8
Levelling
The appliance must be installed level
in order to work properly. If the unit is
not level, the doors and magnetic seal
alignments will not be covered properly
(Fig. 3).
To level the bar freezer, adjust one or both
levelling feet at the base of the cabinet,
turning the feet clockwise to raise or
anticlockwise to lower the unit until it is
level (Fig. 4).
Space requirements
• Door opening:
Place the unit so there is enough
space for the door to open (Fig. 1).
• Clearances:
Ensure that air can circulate freely
around the back of the cabinet, which is necessary
to cool the compressor and condenser. Allow at
least 50 mm clear space at the back and sides of the
unit, and 50 mm at the top of the unit. (Fig. 2).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Installation
50mm
50mm
50mm
