After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
17
7. Remove the freezer door gasket (the rubber seal around the edge of the door),
rotate it, and reattach it (Fig. 13).
8. Refit the bracket for the bottom hinge pin (Fig. 14). Replace both adjustable feet.
9. Place the door back onto the freezer. Ensure it is aligned horizontally and vertically
aligned, so that the seal is snug on all sides.
10. Once this is done, insert the hinge bracket and screw it to the top of the unit (Fig.
15). Use a wrench to tighten it, if necessary.
11. Finally, reattach the hinge cover and screw cover (Fig. 16).
Other Useful Information (Cont.)
Fig. 13
Fig. 14
Fig. 15
Fig. 16
