14
After Sales Support
1300 886 649 | [email protected]
Remote Control Operation (Cont.)
6 TIMER button
This button allows you to program the timer for automatic switch on/off.
• When the unit is switched on, press this button to set the OFF-timer.
When the unit is switched off, press this button to set the ON-timer.
• Press this button once and “H on/off” will appear and start flashing.
Note:
When this indicator starts flashing on the display, you will have
10 seconds to set the timer. If no time has been set within these 10
seconds, the timer setting will quit and you will have to start again.
• Press the / button to adjust the time; press and hold these buttons
to change the time values quickly within the setting range of half an
hour (0.5) to 24 hours.
• Press this button again once to fix the time, the remote control will
immediately send out the signal and “H on/off” will stop flashing.
7 HEALTH button
• This function is ineffective with this model air conditioner. However, this
button is required when setting up Wi-Fi functionality (see page 21).
8 SLEEP button
This function is designed to switch the unit automatically to quiet operation
and maintain the temperature at a comfortable level during the night.
• Press this button to select the Sleep function; the sleep indicator light
will start flashing.
The air conditioner will run in Sleep mode for 10 hours
and then quits Sleep mode and reverts to the previous mode.
• Press the
MODE
or
ON/OFF
button to cancel the Sleep function.
Note:
The unit will turn off automatically if the timer has been set and the
time has run out.
9 iFEEL button
This button works in conjunction with Auto, Cooling or Heating mode.
A temperature sensor is built in the remote control. When this mode is
activated, the air conditioner will maintain the set temperature based on the
temperature close to the remote control. Keep the remote control close to
you to get more accurate and comfortable temperature control.
• Press this button to set the iFeel function. The display will show the
actual room temperature in the vicinity of the remote control.
• Press the
/
button to set the desired temperature.
• To deactivate this function, press the
iFEEL
button. The display will
revert to showing the set temperature.
• This function is ineffective when the appliance is in FAN mode.
