GB-8
GETTING STARTED
The following steps will help you to get your Player ready for use.
CHARGING THE BATTERY
1.
2.
3.
4.
5.
USINGTHE THE PLAYER WITHOUT THE BATTERY
1.
2.
3.
Begin by locating the Battery Pack and the Power Supply Switching Adapter.
Plug the adapter’s circular connector into the battery’s connector labeled “DC IN
12V” found on its side. Do NOT attempt to plug the adapter’s connector into the
battery’s “pigtail” lead on the opposite side of the battery.
Plug the adapter into a convenient electrical outlet.
Confirm that the battery’s CHR (Charging) LED, located a convenient to its “DC IN
12V” connector) is also lit. If RED, the battery is in need of a charge and is being
charged. If GREEN, the battery is fully charged, and further charging is not
necessary, although no harm will be done to the battery if charging is continued.
You cannot over charge the battery. If you prefer, you may keep the battery charged,
whether separated or attached to the DVD player (see below).
NOTE: For extended periods of non-use, however, store the battery, disconnected
from its charger, in a cool and dry place.
The unit can be used without the battery. Turn the unit off and remove the battery as
described above.
Plug the AC adapter's circular connector into the unit's DC IN 12V jack (item 15 on
page 6).
If necessary, plug the other end of the AC adapter into a working wall outlet.
