GB - 8
Monitor
CONTROL REFERENCE GUIDE
1)
MONITOR ON/OFF switch
2)
STANDBY indicator
The LED will illuminate when the monitor is
in standby mode.
3)
Screen
4)
Remote sensor
Receives the remote control unit signals.
5)
Speaker
6)
VOLUME control
7)
SCREEN switch
Wide: Wide-screen
Normal: Pan screen
8)
COLOUR control
Adjust for colour intensity.
9)
BRIGHTNESS control
Adjust the lightness or darkness of the colour.
10) Headphone jack
11) CONNECT TO MAIN UNIT port (Input)
Installation of Monitors
• Use supplied mounting straps installing the monitors onto the seat back in a car.
2) Tightly wrap the mounting
strap around the headrest.
SAFETY WARNING!
• On no account should this unit be used by driver, or left unsecured in the car whilst driving.
• If this unit is being used in your car, be sure that it is secured or held safely, and does not obstruct any
safety device (i.e. airbag, seat belt etc.) that may be fitted.
• All passengers should utilise safety harnesses, where fitted.
• If in doubt, please contact your vehicle manufacturer for further advice.
Mounting
Strap
Elastic
Safety Band
1) Loop the safety band
around the headrest.
1
3
2
4
4
5
6
7
8
9
10
11
GB_05-09_g_V6_AKAI.pmd
5/4/2005, 10:59 AM
8
