GB - 12
C. Connecting a Stereo Receiver or Amplifier
CONNECTIONS
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN or DIGITAL IN
function.
Notes:
• You may experience some interference if the radio tuner function is selected while the television is working.
• Make sure to use the correct Audio/Video cable, connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
Analog connection
Stereo Receiver
or Amplifier
Rear of unit
(No need to connect
the Yellow video plug)
(Red)
(White)
AUDIO/VIDEO CABLE
(not included)
AUDIO/VIDEO CABLE (included)
(Yellow)
(Red)
(White)
Connecting to a Surround Sound System
Audio equipment with
digital audio input jack
COAXIAL DIGITAL AUDIO CABLE (not included)
Rear of unit
Watching a DVD on your TV
1. Turn on the unit, slide the AV IN / DVD switch to "DVD".
2. Turn on the TV and follow the instructions provided with it to play the DVD.
Note: Make sure you use the correct Audio/Video cable.
D. Connecting the unit to a TV
• This DVD Player can be used with a TV that has A/V inputs. If your TV does not have A/V inputs, you can
purchase an RF modulator (sold separately) to connect the DVD player.
TV
(Yellow)
(Red)
(White)
To DVD
AV OUT
Jack
AUDIO/VIDEO CABLE
AUDIO/VIDEO CABLE (included)
(Yellow)
(Red)
(White)
Rear of unit
GB_10-13_g_V6.pmd
5/4/2005, 11:30 AM
12
