14
Default DRC values: 0/4, 1/4, 2/4, 3/4, 4/4.
Level of Compression
Sound Level
0/4
1/4
2/4
3/4
4/4
LOW FREQUENCY EFFECT (LFE)
It can be adjusted when playing program sources recorded in Dolby Digital.
It can only be adjusted under 5.1 channels playback.
If the subwoofer clips due to the LFE signal during Dolby Digital playback, adjust the level as needed.
1. Press
LFE
(Remote label 29). Then press the
VOLUME UP / DOWN
(Remote label 31 and 32) to adjust.
2. You can select in 1 unit from –10 dB to 0 dB.
CHANNEL TRIMMER (CH. TRIM)
1. Press
CH. TRIM
(Remote label 30), the display will show
LS
,
RS, CCH, SW, LCH
and
RCH
and then rotate
MASTER VOLUME
to adjust the volume. The volume can be adjusted from –10 dB to +10 dB
2. If the master volume is not adjusted after 5 seconds, the display will back to normal automatically.
* Please note that if your DVD player has only 2 channels, then the amplifier can adjust left and right front
speakers only.
DOLBY DIGITAL
1.
Select the source then start playing
2.
Press
DOLBY DIGITAL
(Front Panel label 29 or Remote label 14) to activate the Dolby Digital function.
* This effect should be complementary with a Digital input signal and a digital disc with Dolby Digital encoded
STEREO
1.
Select the source then start playing
2.
Press 2 CH (Front Panel 30 or Remote label 11) to have stereo effect
* You can choose to have stereo output also with Digital input
MASTER VOLUME
It is to increase or decrease the master speaker volume by rotating the
MASTER VOLUME
control (Front Panel
13 or Remote label 31 and 32). The volume on the display will be changed accordingly.
The highest output is at 0 dB (
MAX VOL
) and the lowest is at –79 dB (
MIN VOL
).
BALANCE
It is to adjust the balance of the left & right speakers volume.
²
Turn the
BALANACE
knob (Front panel 15) clockwise or anti-clockwise to adjust the balance of the R & L
speakers’ volume.
Increasing
Decreasing
