Only one vhfBridge can be connected to one compatible Ajax hub.
In order to connect vhfBridge
For the detection and pairing to occur, the transponder should be located within the
coverage area of the hub’s wireless network (at the same guarded object).
If the connection has failed, disconnect vhfBridge for 5 seconds and try again. If
the transponder has already been assigned to another hub, turn off vhfBridge
and then follow the standard addition procedure.
The connected transponder will appear in the list of hub devices in the app.
Updating device statuses depends on Jeweller settings. The default status
update period in the app is 36 seconds.
2. Check that the hub is on and has access to the internet (via Ethernet cable,
Wi-Fi, and/or mobile network). You can do this in the Ajax app or by
checking the hub logo on the faceplate. The logo should light up white or
green if the hub is connected to the network.
3. Ensure that the hub is disarmed and does not start updates by checking its
status in the Ajax app.
1. Open the
. If your account has access to multiple hubs, select the
one to which you want to add vhfBridge.
2. Go to the Devices tab and click Add device.
3. Name the transponder, scan or enter the QR code manually (located on the
device body and packaging), and select a room and a group (if the group
mode is activated).
4. Click Add; the countdown will begin.
5. Switch on vhfBridge by holding the power button for 3 seconds. Keep in
mind that the hub connection request is only transmitted when the
integration module is switching on.
