vhfBridge can be connected to any VHF transmitter with relay inputs. Connection via
UART, RS-485, and other interfaces is not supported.
How to connect a VHF transmitter to vhfBridge
When connecting the VHF transmitter, do not twist the wires together, but solder them.
The ends of the VHF transmitter wires, which will be inserted into the vhfBridge
terminals should be tinned or crimped with a special sleeve.
TR-41 from Puper
1. Turn off the vhfBridge power (if power was connected).
2. Turn off vhfBridge.
3. Select vhfBridge outputs to which you want to connect the VHF transmitter.
4. Pull the VHF transmitter wires into the vhfBridge body through the holes.
There are perforated sections on the body that can be broken off and the cable can
be pulled through them.
5. Connect the VHF transmitter to the control outputs of vhfBridge according
to the wiring diagram in the User Guide supplied by the VHF radio
transmitter manufacturer.
6. Fasten the cable securely to the vhfBridge terminals using a straight
screwdriver (slot PL 3.0).
7. Connect the power to the third-party VHF transmitter.
If a VHF transmitter requires 12 V power to operate, it can be connected to the
power terminals of the corresponding vhfBridge zone. Do not connect the external
power supply to the transmitter power terminals, as this may damage the device.
