Note that after editing the settings, you should click the Back button to save them.
Setting
Meaning
First eld
vhfBridge name. It is displayed in the text of
SMS and noti cations in the event feed.
To change the device name, click on the pencil
icon
.
The name can contain up to 12 Cyrillic
characters or up to 24 Latin characters.
Room
Selecting the virtual room to which vhfBridge is
assigned.
The room name is displayed in the text of SMS
and noti cations in the event feed.
Monitoring of the battery charging duration
Set up of the battery charging duration.
When this option is enabled, the system will
send a malfunction noti cation if the battery
connected to vhfBridge has been charging more
than 40 hours.
Disable monitoring if the third-party VHF radio
transmitter is powered directly from the battery
and not from the vhfBridge power terminals.
Pulse duration
Pulse time on an event (from 1 to 255 seconds).
Set in increment of 1 second.
The default value is 5 seconds.
Jeweller Signal Strength Test
Switches vhfBridge to the Jeweller signal
strength test mode.
The test allows you to check the signal strength
between the hub and vhfBridge and determine
the optimal installation location.
5. Click Back to save the new settings.
