AJAX MotionProtect, User Manual

Page: 6 / 16

Sensitivity Sensitivity level of the motion sensor
Always Active
If active, the motion detector is always in the
armed mode
Temporary Deactivation
Shows the status of the device: active,
completely disabled by the user, or only
noti cations about triggering of the device
tamper button are disabled
Firmware Detector rmware version
Device ID Device identi er
Settings
Setting Value
First eld Detector name, can be edited
Room
Selecting the virtual room to which the device is
assigned
Delay when entering, sec Selecting delay time when entering
Delay when leaving, sec Selecting delay time on exit
Delays in night mode Delay turned on when using night mode
Arm in night mode
If active, the detector will switch to armed mode
when using night mode
Alarm LED indication
Allows you to disable the ashing of the LED
indicator during an alarm. Available for devices
with rmware version 5.55.0.0 or higher
Sensitivity Choosing the sensitivity level of the motion
sensor.
For MotionProtect:
1. Devices
2. MotionProtect | MotionProtect Plus
3. Settings
How to nd the rmware version or
the ID of the detector or device?