Before installing the detector, make sure that you have selected the optimal location and
it is in compliance with the guidelines contained in this manual
The Ajax MotionProtect detector (
MotionProtect Plus
) should be attached to a
vertical surface or in the corner.
1. Attach the SmartBracket panel to the surface using bundled screws, using
at least two xing points (one of them – above the tamper). After selecting
other attachment screws, make sure that they do not damage or deform the
panel.
The double-sided adhesive tape may only be used for temporary attachment of the
detector. The tape will run dry in the course of time, which may result in the falling
of the detector and actuation of the security system. Furthermore, hitting can
damage the device.
Summary of Contents for MotionProtect
Page 16: ......