background image

28

Search Systems

The device can be used with the following two 

systems:

    1 . 

W

 Manual Long-Range Locator system: 

The term manual describes the user ability to 

adjust the search parameters manually to fit the 

needed requirements of the search, Where the 

target type can be set from the list in addition 

to the other parameters as the frontal search 

distance, and the depth .

    2 . 

V

 Automatic Long-Range Locator system: 

    • The device has Automatic Detection System 

for the located targets and shows the target 

type on display automatically, and calculating 

the target distance from the device with high 

precision .

    • The user can also determine the depth after 

acquiring the target location automatically .

    • The device provides the user with a 

comprehensive report regarding the search 

process with the ability to save the report for 

review .

The High Gain Antenna and Roaming Antennas 

must be connected first to proceed to the search 

interface.

Assemble the High Gain Antenna as shown in 

“figure 5 -High Gain Antenna Assembly” on page 

15.

Assemble the Roaming Antennas as shown in 

“figure 6 -Roaming Antennas Assembly” on page 

16.

18:46

Summary of Contents for Alpha

















































Reviews: