The Vanguard
Wireless
HART Gas Detector is simple to set up and operate.
This card is intended to be a quick start guide. For more details, please refer
to the installation & maintenance (I&M) manual shipped with the device or
visit www.ueonline.com/vanguard to download a copy.
Q
G
uide
www.ueonline.com/vanguard QS_TCD card-01
180 Dexter Ave.,Watertown, MA 02472
uick Start
Mounting Considerations
• This device should be mounted vertically with the sensor pointing downward.
• For gases that are heavier than air, it is recommended that the device be
mounted near the ground below the potential leak source.
• For gases that are lighter than air, it is recommended that the device be
mounted above the potential leak source, and if indoors near the ceiling.
• Mount the device where shock and vibration are minimal.
• Do not mount in ambient temperatures that exceed the temperature limits
on the device labeling.
• Wall mounting could affect the signal strength of the device.
