settings; the default value is 36 seconds.
If the connection fails, try again in 5 seconds. Note that if the maximum number
of devices has already been added to the hub (
),
you will be notified when you try to add a new one.
MotionCam Outdoor only works with one hub. When connected to a new hub,
the detector stops sending commands to the old hub. Once added to a new hub,
MotionCam Outdoor is not removed from the device list of the old hub. This
must be done through the Ajax app.
Icons
The icons represent some of MotionCam Outdoor statuses. You can see them in
the Devices tab in the Ajax app.
Icon
Value
Jeweller signal strength — displays the signal strength between the hub and the
detector
MotionCam Outdoor battery level
Malfunction detected. A list and description are available in the detector states
The detector operates in Always Active mode
Entry and/or exit delay is enabled
MotionCam Outdoor will work when Night Mode is enabled
MotionCam Outdoor has detected motion
MotionCam Outdoor is temporarily disabled
Summary of Contents for MotionCam
Page 32: ......