GlassProtect recognizes glass break at a distance of up to 9 meters. Its
microphone should be positioned no more than 90 degrees relative to the
window(s).
Make sure that any curtains, plants, furniture, or other objects do not overcover
the microphone opening.
If there are curtains on the window, place the detector between them and the
window, for instance, at the window side jamb. Otherwise, curtains can mute the
glass break sound, and the detector will not be triggered.
Detector installation procedure
Before installing the detector, make sure that you have selected the optimal
location that follows the guidelines of this manual!
If LED doesn’t blink after xing in SmartBracket, check the status of the tamper
in the Ajax app and then the xing tightness of the panel.
If someone detaches the detector from the surface or takes it off the
attachment panel, the security system noti es you.
5.
inside premises with the temperature and humidity beyond the range of
permissible limits;
6.
closer than 1 m to the hub.
1.
Fix the SmartBracket attachment panel using bundled screws. If you use
any other attachment tools, make sure that they do not damage or deform
the attachment panel.
Use double-side adhesive tape only for temporary attachment of the detector. The
tape runs dry with time, which can cause falling, false triggering, and detector
malfunction.
2.
Put the detector on the attachment panel. When the detector is xed in
SmartBracket, it blinks with LED, signaling that the tamper is closed.
