RovoRx UltraHD HDBaseT Receiver v1.0r1 23 www.aja.com
3G-SDI Mode
Selects the 3G SDI Video Mode. Choose from the following:
• Level A (default)
• Level B
Enable PtoPsF
Choose to convert incoming progressive format HDMI video to PsF SDI video.
• Off - (default) No conversion.
• On - Converts the video to PsF (if it is progressive format and low frame rate).
DA Function
Choose to replicate the signal on any extra BNC outputs. How this feature works
depends on signal bandwidth, and is disabled under some circumstances. When
disabled the On/Off status next to the control is replaced with dashes (-------).
• Off - (default) no video sent to any extra BNC outputs.
• On - For HD signals and single link 6Gbps UltraHD LFR 4:2:2 signals, three
additional copies of the signal are sent to the SDI Out 2, 3, and 4 BNCs. For
dual link output signals one additional copy of the signal is sent to the pair of
SDI Out 3 and 4 BNCs.
UHD LFR
Controls what output video transport method will be used for Low Frame Rate
incoming video, using all four BNC outputs, two BNC outputs, or one BNC output.
How this feature works depends on signal bandwidth. The status next to the
control reports the actual output signal. Choose from the following:
• Quad 1.5 Gbps
• Dual 3 Gbps
• Single 6 Gbps
NOTE: The number of output BNC connectors used depends on the video transport,
color space, and video format. For example, if a 4:4:4 color space is selected for
a UltraHD LFR video format, and Single 6.0 Gbps is selected here, four 3G signals
are required for that bandwidth so all four BNC outputs must be used for that one
signal. In this case the DA Function will be disabled.
