RovoRx UltraHD HDBaseT Receiver v1.0r1 15 www.aja.com
RovoRx-SDI Rack Mounting
The RovoRx-SDI is too large to be mounted into AJA's DRM frame, and the
location of the unit's threaded holes are incompatible with AJA's RMB bracket.
The threaded holes in the case of the RovoRx-SDI can be used for mounting,
using 1/4 inch 440 thread screws. However each RovoRx-SDI runs at about 18
watts, so air movement will be required wherever it is installed. The separate
RovoRx-SDI power suppliy can be tie-wrapped to the rack frame, provided air
flow is not restricted.
Figure 4
shows an example of mounting multiple RovoRx-SDI unit into a rack
frame that ensures adequate cooling.
Figure 4. RovoRx-SDI Rack Mounting Example
USB Control and Setup—Using AJA Mini-Config
Your AJA Mini-Converter can be used right out of the box for some applications
since it is designed to recognize inputs and perform standard actions
automatically by default. However, to use its full capability, you must use AJA’s
Mini-Config software application for PCs and Macs. This same application can be
used to update to new Mini-Converter software released by AJA.
Acquiring AJA Mini-Config
AJA’s Mini-Config application is available for download from the AJA website.
