OG-3GDA Series openGear Cards v1.2 14 www.aja.com
Figure 12. The white plastic tab for the card on the right is now upright. Both
cards are shown fully inserted.
5. Close the frame door as follows:
A. Slide the door into the frame.
B. Pull and release the door tabs to ensure the frame door is securely locked
to the frame.
Cabling
Refer to
"I/O Connections for OG-3GDA-1x9" on page 7, "I/O Connections for OG-
3GDA-2x4, Dual 1x4 Mode" on page 8, and "I/O Connections for OG-3GDA-2x4,
to identify the input and output signal connectors.