KONA IP Transport, Capture, Display v16.0r1 25 www.aja.com
For KONA IP you can choose to install:
• KonaIP s2022—For use only with ST 2022-6 full bandwidth video, and
supports use of two SFPs for up to four uncompressed HD streams.
• KonaIP ST 2110—For use only with full bandwidth video, supports use of
two SFPs for up to four uncompressed HD streams, and permits transport
of individual video or audio streams, or a set of multiple video and audio
streams.
Most ST 2022-6 functionality is similar to ST 2110, with some exceptions. Refer
"Control Panel Operation in ST 2110 Mode" on page 51
for information about
these differences.
Control Panel Operation in ST 2022-6 Mode
Control Screen
The KONA IP card can be controlled by various software applications running on
a host computer. The Control screen is where you select how the KONA IP directs
video and is used by application software. This screen also provides control for
configuring output timing with regard to external reference video and horizontal/
vertical delay. The top of the Control Screen shows the currently selected AJA
device if more than one is available in your system.
Default Output
This is where you select what the KONA IP card will output as a default when
no application has control of the board, such as when the Mac Finder or
Windows Navigation Pane is active. Since KONA IP can be controlled by software
applications as well as its own control panel, the output can change dynamically.
When you select many video applications, they will take control of the KONA IP
inputs and outputs. However, when an application that doesn’t take control is
active, these settings determine what KONA IP will output.
