AJA KONA IP Installation And Operation Manual Download Page 18

Page: 18 / 76

KONA IP Transport, Capture, Display v16.0r1 18 www.aja.com

Chapter 3 – Operation

Using KONA with Professional Video /Audio Software

After you install the AJA software package on your computer, you’re ready to

begin capturing and playing back video and audio using your choice of third-

party software. You can go here for AJA software and documentation:

https://www.aja.com/en/support/downloads

For further support information and downloads for third-party software, go to:

https://www.aja.com/en/category/edit/compatibility

Frequently Asked Question documents for various AJA products are available at:

https://www.aja.com/products/kona-ip#support

Capture Formats

When capturing, you can record data in the following file formats:

•  DPX
•  TGA
•  BMP
•  QuickTime
•  MXF

NOTE: Support by KONA IP of QuickTime for Windows has been discontinued. Instead,

AJA supports ProRes family capture and playback for macOS, Windows and Linux

via AJA Control Room.

NOTE: Other file types can be captured using third-party capture applications such as

Sienna, Softron, Tools on Air, Drastic Technologies, or Quadrus.

AJA Control Panel Overview

The AJA Control Panel is a software application that provides a simple visual

showing how the KONA IP hardware is currently configured and allows you to

make changes. You can change signal input and output parameters and define

the video processing that will be performed.
The AJA software installer automatically installs the Control Panel application on

your computer.

Summary of Contents for KONA IP













































































Search results

Summary of Contents for KONA IP

Reviews:

Related manuals for KONA IP

Brands by name

Popular brands

AJA KONA IP, Installation And Operation Manual

Search results

Summary of Contents for KONA IP

Reviews:

Related manuals for KONA IP

Brands by name

Popular brands