manualshive.com logo in svg

AJA io4K, Installation And Operation Manual, Page: 54 / 76

Share
Download
AJA io4K Installation And Operation Manual Download Page 54

Io XT/4K Capture, Display, Convert v14.0 54 www.aja.com

 

Io 4K HDMI HDR Screen in 4K Mode

Figure 22.  HDMI HDR Screen with 4K Primary Format

The HDMI-HDR screen, only available in 4K Mode, provides a mechanism to 

inform an HDMI sink device (such as a TV or monitor) that the video content is 

HDR. This includes generation of the Dynamic Range and Mastering Infoframe 

and the static metadata descriptors as defined in CTA-861.3 and HDMI v2.0a. 

Included are pre-canned primaries values for BT.2020 and DCI P3 color gamuts.

HDR Mode

•  Off - HDR Mode disabled (default).
•  DCI-P3 D65 -  Only Display Mastering Luminance available for Digital 

Primaries.

•  BT.2020 - Typically used with HDR.
•  Custom - Allows custom values for the Digital Primaries.

EOTF

The Electrical Optical Transfer Function metadata bit tells the HDMI display which 

EOTF to use. Most TV’s will require this to be set to ST 2084 for their HDR modes.

•  Trad Gamma SD
•  Trad Gamma HD
•  ST 2084 (HDR-10)
•  HLG (Hybrid Log Gamma) - No meta-data for Digital Primaries.

Ext. Color

Most TV’s require this be set to Non-Const Luma to go into their HDR modes.

Summary of Contents for io4K













































































Reviews:

No comments