manualshive.com logo in svg

AJA io4K, Installation And Operation Manual, Page: 15 / 76

Share
Download
AJA io4K Installation And Operation Manual Download Page 15

Io XT/4K Capture, Display, Convert v14.0 15 www.aja.com

 

Figure 3.  Update Completed Messages

6.  Click OK and then power cycle the computer by shutting it down 

completely.

7.  After the computer has shut down, power cycle the AJA device by 

disconnecting and reconnecting it's power plug.  If the unit is an Io XT, press 

the front power switch. 

8.  Restart the computer. 
9.  Open AJA Control Panel. The AJA hardware with the updated firmware 

should be recognized by the Control Panel application.  

Firmware Versions

Io 4K supports two different versions of firmware that have different capabilities. 

One version of firmware can be installed at a time.

Io 4K (UFC Mode)

When UFC firmware is installed, Io 4K supports up, down and cross conversion 

between 2K, HD, and SD video formats. This version does not support UltraHD/4K 

playback or capture.

Io 4K (4K Mode)

When 4K firmware is installed, Io 4K supports input and output of UltraHD/4K, 2K, 

HD, and SD  video, and down-conversion of UltraHD/4K to 2K/HD video on the 

monitor output BNC. In 4K Mode Io 4K also provides the Audio Mixer screen, to 

control audio monitoring. 

Summary of Contents for io4K













































































Reviews:

No comments