www.aja.com
90
FS4 Frame Synchronizer/Converter v1.1
same version. Also, if the Default Gateway is not configured properly, other AJA devices will
not be visible. If the display shows no devices found, check the gateway setting.
Resetting Values To
Factory Default
Settings
FS4 web browser screens feature many user controls that can be reset to factory default
values by simply “right-clicking” on the parameter label. When you right-click, the
browser displays a
Reset to Factory
popup that if clicked will cause the parameter to be
reset.
NOTE:
This reset procedure only works with computers that allow right-clicking. Some computers
may not permit this operation.
You can perform a global reset to factory values of all System, Video, Audio, and most
Config parameters (the same set of parameters acted on by a Preset Recall).
To perform a global reset:
1. Go to the
Presets
screen.
2. Click on the
Recall
button in the
Factory Preset
row.
User preferences, network settings, and existing Presets are not affected by recalling the
Factory Preset.
Drop Down
Parameter
Operation
Most parameters available on the browser are selected from a drop-down list. The
currently active parameter is displayed. Click on the down arrow symbol next to the
parameter to display the list and select an alternative value. The FS4 will immediately
operate with the new setting.
Slider Operation
Some screens contain slider controls for setting values. To set a value, you can click on a
slider to select it and then use the mouse to drag the slider to the position you desire. For
fine tuning, while the slider is selected (highlighted by a blue border), use the keyboard
left and right arrow keys to change the value one unit at a time. Or you can enter the
value directly by clicking on the number displayed above the slider, type in your number
then hit
Enter
to have it take effect. After setting a slider's position, click on the page's
background area (blue highlight turns off ) to ensure the change is confirmed and saved.
Sub-Menus
Some parameters, when activated, open sub-menus. The sub-menus are a lighter gray
color and have a collapse/expand button on the parent selection. This lets you collapse
the sub-menus to make it easier to configure the system. The collapsed setting only stays
in effect until the user reconnects or refreshes the browser.
Screen Descriptions
Now that you have had an introduction to how the FS4 browser works and how to
navigate the screens, each screen and its settings are described in detail (click to jump).
•
“Network Pane and Network Configuration Screen” on page 91
•
“Alarm Configuration Screen” on page 93
Caution!
Recall Factory Preset changes the settings for both Single Channel and Four Channel
FS4 operating modes to their factory default values.