manualshive.com logo in svg

AJA FS2, Installation & Operating Manual

Share
Download
AJA FS2 Installation & Operating Manual Download Page 77

FS2 v2.1r1

www.aja.com

77

 

Auto blank

In Auto Blank mode, the FS2 automatically detects presence or absence of line 21 caption 
data on the SD input. If no line 21 caption is present, the FS2 passes the video unaltered. 
If line 21 data is detected, the FS2 copies the data, blanks line 21, and reinserts translated 
captioning on the transformed HD output if parameter 18 Caption Xlator is On. If the 
Caption Translator is Off, the HD output will not contain captioning. This is the setting to 
use if your SD input video sometimes contains captions and other times does not, or if 
you are uncertain which setting to use.I

Test Pattern

This parameter selects the video source for the Test Pattern Generator. The pattern 
generator is turned off and on using Output parameter 3 Video Output mode.

21 Test Pattern Video 

Freeze

This parameter tells the FS2 to freeze the current video frame on all outputs. This may be 
useful either for testing or in case of loss of the input source.

22 Freeze Output 

The freeze feature can be controlled not only by the front-panel and web browser 
interface, but also by a GPI input. When a GPI input is causing the freeze condition, the 
EXT lamp will be lit on the front-panel. 

AUDIO 1 and AUDIO 2 Menu Groups

The Audio Menus control the FS2’s audio routing and signal processing. Because the 
selections for the video processors are identical, both are described here. 

Blank (default)

In Upconvert or SD Aspect Ratio Convert modes, this setting copies 

caption data and blanks 525i input video Line 21 caption data 
before conversion, and may or may not include that data (see 
above). 

Pass

Passes input video unaltered to the converter and to the outputs. 

Auto blank

The FS2 automatically detects caption data on SD input, passing 

unaltered video if no line 21 caption is present, and reinserting 
caption data if 18 Caption Xlator is On. 

75% Bars (default)

Sets the test pattern to 75% bars.

Ramp

Sets the test pattern to ramp.

Multiburst

Sets the test pattern to a multiburst.

Flat Field

Sets the test pattern to flat field chroma.

Black

Sets the test pattern to black.

100% Bars

Sets the test pattern to 100% bars.

Off (default)

Normal operation. The FS2 outputs video from the input.

On

The FS2 captures and freezes the most current video frame and 

displays it on the outputs as long as this parameter is set to On.

USO 

RESTRITO

Summary of Contents for FS2






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands