FS2 v2.1r1
www.aja.com
31
5. Turn
SELECT
to advance to
2.3 Subnet Mask.
Use the
SELECT
and
ADJUST
knobs as in
the previous step to set the desired subnet mask.
6. Turn
SELECT
to advance to
2.4 Default Gateway.
Use the
SELECT
and
ADJUST
knobs as
in the previous step to set the desired gateway address.
7. Run a browser on the computer and type in the IP address you set for the FS2. You
should now see the FS2’s
Status
screen.
When you can access the FS2 screens, turn to
“Browser Remote Control” on page 85
for
details about configuring the FS2 using a browser.
USO
RESTRITO
