Aiwa XR-M161HS(S), Service Manual

Page: 55 / 57

-54-
SPEAKER DISASSEMBLY INSTRUCTIONS-1/1
Insert a flat-bladed screwdriver into the position indicated by the arrows
and remove the panel. Remove the screws of each speaker unit andthen
remove the speaker units.
Remove the grill frame and four pieces of rubber caps by pulling out
with a flat-bladed screwdriver. Remove the screws from hold where in-
stalled rubber caps. Insert a flat-bladed screwdriver into the position in-
dicated by the arrows and remove the panel. Remove the screws of each
speaker unit and then remove the speaker units.
Insert a flat-bladed screwdriver into the position indicated by the arrows
and remove the panel. Turn the speaker unit to counterclockwise direc-
tion while inserting a flat-bladed screwdriver into one of the hollows
arround speaker unit, and then remove the speaker unit. After replacing
the speaker unit, install it turnning to clockwise direction unitil "click"
sound comes out.
Type.1
Type.3
Type.2
TOOLS
1 Plastic head hammer
2
(
-
) flat head screwdriver
3
Cut chisel
How to Remove the PANEL, FR
1. Insert the ( - ) flat head screwdriver tip into the gap between
the PANEL, FR and the PANEL, SPKR. Tap the head of the
(
-
) flat head screwdriver with the plastic hammer head, and
create the clearance as shown in Fig-1.
2. Insert the cut chisel in the clearance, and tap the head of the
cut chisel with plastic hammer as shown in Fig-2, to remove
the PANEL, FR.
3. Place the speaker horizontally. Tap head of the cut chisel with
plastic hammer as shown in Fig-3, and remove the PANEL,
FR completely.
Type.4
Fig-1 Fig-2
Fig-3
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four
corners of the PANEL, FR with the plastic hammer to fit the
PANEL, FR into the PANEL, SPKR completely.