background image

19

Before Operation (Continued) - DVD part

Parental Control

Rating 

Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to 
certain scenes on the disc. These scenes are rated from
1 to 8, and alternatively, more suitable scenes are avail-
able for selection on some discs. Ratings are 
country-dependent. The Parental Control feature allows
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.

11

Select “Rating” on the Setup menu using the

3

3

3

3

and 

4

4

4

4

buttons.

2

2

While “Rating” is selected, press 

22

2

2

.

3

3

When you have not entered a password yet.

Enter a 4-digit password using the numbered but-
tons to create a personal 4-digit security password,
then press OK/ENTER. Enter the 4-digit password
again and press OK/ENTER to verify.

When you have already entered a password;

Enter a 4-digit password using the numbered but-
tons to confirm the personal 4-digit security pass-
word, then press OK/ENTER.

If you make a mistake before pressing OK/ENTER, press
CLEAR and enter 4-digit security password again.

4

4

Select a rating from 1 to 8 using the 

3

3

3

3

/

4

4

4

4

but-

tons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.

Unlock:

If you select Unlock, Parental Control is not

active. The disc will play in full.

Ratings 1 to 8:

Some discs contain scenes not

suitable for children. If you set a rating for the play-
er, all disc scenes with the same rating or lower will
be played. Higher rated scenes will not be played
unless an alternative scene is available on the disc.
The alternative must have the same rating or a
lower one. If no suitable alternative is found, play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.

5

5

Press OK/ENTER to confirm your rating selec-

tion, then press 

i

/

SETUP to exit the menu.

Country Code 

Enter the code of a country/area whose standards were
used to rate the DVD video disc, referring to the list
(See “Country Code List”, page 35.).

11

Select Country Code using the 

3

3

3

3

/

4

4

4

4

buttons on

the setup menu.

2

2

While Country Code is selected, press 

2

.

3

3

Follow step 3 of “Rating” on left.

4

4

Select the first character using the 

3

3

3

3

/

4

4

4

4

buttons.

5

5

Shift the cursor using 

11

1

1

/

2

buttons and select

the second character using 

3

3

3

3

/

4

4

4

4

buttons.

6

6

Press OK/ENTER to confirm your country code
selection, then press 

i

/

SETUP to exit the

menu.

Note

Confirmation of the 4-digit password is necessary when
the code is changed (see “Changing the 4-digit code”
below ).

Changing the 4-digit code

1

Follow Steps 1-2 as shown above to the left (Rating).

2

Enter the old code, then press OK/ENTER.

3

Select Change using the 

3

3

3

3

/

4

4

4

4

buttons then press

OK/ENTER.

4

Enter the new 4-digit code, then press OK/ENTER.

5

Enter exactly the same code a second time and veri-
fy by pressing OK/ENTER.

6

Press 

i

/

SETUP

to exit the menu.

If you forget your 4-digit code

If you forget your password, to clear the current pass-
word, follow the procedure below.

1

Press 

i

/

SETUP

to display the setup menu.

2

Use the Number buttons to enter the 6-digit number
“210499”.

The 4-digit password is cleared.

3

Enter a new code as shown above to the left (Rating).

DVD

DVD

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

Code Set

D E

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

8

7

6

5

4

3

2

1

Unlock

Change

PREP

ARA

TION

Summary of Contents for HV-DH1EH






































Reviews: