CONNECTIONS
Setting up the unit
Two ways of setting up the main units are recommended.
q
Vertical placement
w
Horizontal placement
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord at the end.
• There are no differences between the front speakers. Likewise,
there are no differences between the surround speakers. Both
speakers can be connected as L (left) or R (right).
1 Connect the flat cable of the RX-NAVH90 to the
FD-NH90.
Push the connector in until it clicks.
2 Connect the speaker cords with the SX-NAVH90.
The cords with the white stripes should be connected to the
0
terminals and the other cords to the
9
terminals.
3 Connect the speaker cords with the main unit.
The cords with white stripes should be connected to the
0
terminals and the other cords to the
9
terminals.
4 Connect the SX-C400 center speaker and SX-
R230 surround speakers.
5 Connect the supplied antennas.
Connect the FM antenna to the FM 75
Ω
terminals and the
AM antenna to the AM LOOP terminals.
6 Connect the AC cord to an AC outlet.
To mount the surround speakers on the wall
Carefully mount the surround speakers so that the speakers are
firmly secured.
3
ENGLISH
FD-NH90
RX-NAVH90
FD-NH90
RX-NAVH90
