Remote control
Insert two R6 (size AA) batteries.
R6 (AA)
When the reach of the remote control signal is less than
5 meters (16 feet), replace the batteries.
The remote control may not operate correctly
when:
- The unit is exposed to intense light, such as direct
sunlight
- Objects block the remote control signal to the unit
To use the buttons on the remote control
Buttons on the remote control and the main unit with
identical indications have the same functions.
To turn the power on
Press POWER to turn on the display.
When using the unit on the batteries, this button will not
turn the power on.
To turn the power off
Press POWER to turn off the display.
When one of the deck operation buttons is pressed, this
button will not turn the power off.
To use the FUNCTION button
Each time FUNCTION is pressed while the power is on,
the function is selected cyclically.
CD
RADIO
TAPE *
* applicable when one of the deck operation buttons is
pressed
ENGLISH
5
Specifications
Radio section
Frequency range, antenna – FM: 87.5 - 108.0 MHz
Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz
step) Ferrite bar antenna
Deck section
Track format – 4 tracks, 2 channels / Frequency range
– Normal tape: 50 - 12,000 Hz (JEITA) / Recording
system – AC bias / Erasing system – Magnet erase /
Heads – Deck 1: Recording/playback head (1), Erasure
head (1); Deck 2: Playback head (1)
CD player section
Disc – Compact disc / Scanning method – Non-contact
optical scanner (semiconductor laser) / Rotation speed
– Approx. 500 - 200 rpm/CLV / Error correction – Cross
interleave, Reed, Solomon code / Number of channels
– 2 channels / D/A conversion – 1 bit DAC /
Laser diode properties –
Material: GaAlAs
Wavelength:
λ
= 780 nm
Emission duration: Continuous
Laser output: Less than 44.6
µ
W (This output is the
value measured at a distance of 200 mm from the
objective lens surface on the optical pick-up block with
7 mm aperture.)
General
Power requirements – DC 12 V using eight size D (R20)
batteries, AC 120 V, 60 Hz / Dimensions (W
×
H
×
D) –
274
×
246
×
260 mm (10
7
/
8
×
9
3
/
4
×
10
1
/
4
in.) / Weight
– 3.4 kg (7 lbs. 8 oz.) (excluding batteries) / Power
output – 5 W + 5 W (JEITA, 2.7 ohms DC) / Power
consumption – 20 W / Accessories – AC cord (1),
Remote control (1)
Speaker
Type – 120 mm cone type / Dimensions (W
×
H
×
D) –
185
×
234
×
240 mm (7
3
/
8
×
9
1
/
4
×
9
1
/
2
in.) / Weight –
Approx. 1.3 kg (2 lbs. 14 oz.)
×
2 / Impedance – 2.7
ohms / Allowable max. input – 7 W
Specifications and external appearance are subject to
change without notice.
COPYRIGHT
Please check the copyright laws relating to
recordings from disc, radio or external tape for the
country in which the machine is being used.
If an erroneous display or malfunction occurs
Make sure that none of the deck operation buttons is
pressed.
Press
s
while pressing TAPE/POWER/
6
STANDBY.
If the unit cannot be reset in the way above, disconnect
the AC cord and remove all the batteries to turn off the
display.
Leave the unit for a while and turn the power back on.
