Aiwa AM-CL33, Service Manual

Page: 4 / 35

– 4 –
About Disassembling and Reassembling
Service position can be established only by removing the PANEL, BOLT.
1. Removing the PANEL, TOP
(1) Remove the five screws “a”.
(2) Remove the PANEL, TOP.
*1 When re-attaching the PANEL, TOP, the arm should be engaged with the HLDR, CTRG.
DISASSEMBLY INSTRUCTIONS
2. Removing the PANEL, BOT
(1) Remove the screw “a” and the screw “b” and remove the two screws “c”.
(2) While being careful not to bend the screw of the screw hole, remove the PANEL, BOT.