7. Push the control panel with the wooden veneering by hand out of the opening from the back.
8. Release the plug and carefully disconnect the plug connection.
9. Remove the two screws at the indicated locations with a screwdriver. (the screws will not fall out)
10. Tip the OEM radio downwards slightly, then pull it out and disconnect the plug connections.
11. Insert the DIN ISO frames into the radio opening and fasten them with the original screws.
12. Assemble the center console again.
13. If necessary, also adapt the cabling to the DIN ISO radio.
14. Connect the cable to the DIN ISO radio.
15. Push the DIN ISO radio into the opening and let it snap into place.
- 5 -
