26
Installation and Operating Instructions
V00
4.
I
nsert the crimped conductors L, N and PE into the corresponding terminals and
tighten the screw with a Torx screwdriver(TX 8, torque: 1.4Nm). Ensure that all
conductors are securely in place in the screw terminals on the bush insert.
1
2
3
5.
Assemble the locking cap, threaded sleeve and swivel nut together. When doing
so, hold the bush insert firmly by the locking cap , This ensures that the threaded
sleeve can be screwed firmly onto the bush insert. Then screw the threaded
sleeve and swivel nut.
6.
Plug the AC connector into the jack for the AC connection and screw tight. When
doing so, align the AC connector so that the key on the inverter AC jack is inserted
into the keyway on the AC connector bush insert.
